A versatile high performance water based zircon coating for steel castings and critical cast iron castings.
Magnakote ZW is highly thixotropic water based zircon coating in a creamy consistency. It is applied in ready to use form and hence requires minimum preparation. The uniform layer deposition and high refractory filler ensures excellent casting finish for iron & steel castings. Magnakote - ZW is particularly useful in critical castings like impellers where fettling is very difficult.
Features and Benefits
- Excellent Surface Finish : Use of high refractory fillers gives excellent surface finish to castings and reduces sand fusion tendency which also reduces fettling/ rework considerably.
- Versatile Nature : Magankote ZW is a ready to use water based zircon coating. Its versatile nature makes it suitable for various coating. Its Versatile nature makes it suitable for various coating applications such as brushing, spraying & dipping.
- Thixotropic Nature : Thixotorpic nature of magnakote ZW not only gives excellent coverage but also reduces brush marks on casting. This feature also ensures lower consumption of coating which makes it cost effective.
- Faster Drying : Use of speciality chemicals in Magnakot ZW imparts it fast drying characteristic. This helps in quicker delivery of cores / Moulds to moulding line.
In order to get best out of product, it is essential to mix Magnakote ZW properly before use. The manual mixing by hand is sufficient to make it homogeneous.
Apply Magankote ZW on moulds/ cores by brushing / Spraying / Dipping. Allow it to air dry for about half an hour. The moulds / cores can then be dried in oven or by torching.
Magnakote ZW is ideally suitable for moulds and cores made of alkyd, phenolic no bake and cold box binders.
MAGNAKOTE-ZW is available in 40 kg Carbuoy.
Six months from date of manufacturing.
To be stored in a cool & dry place.